Turning Speed Detection


Set up your sensor.


Turning Speed Detection confirms the shaft-turning speed frequency based on an estimated speed. The dominant peak nearest the suspected turning speed frequency is most likely the turning speed. Turning Speed Detection is available when you collect data on a variable speed machine.


  1. Create a job or open Analyze from a route measurement point.
  2. From the Analyze main menu, press F11 Turning Speed Detection.
  3. Press Start or Enter to collect the data.
  4. Enter an estimated machine speed.
  5. Press Enter.
  6. Press Enter to view the data.
    One or more plots display the collected data. The analyzer displays the detected speed at the bottom of the screen.
    Note: You cannot store this data.