Change the measurement point ID


Note: This is available only in Advanced Balance mode.


  1. From the Balance main menu, press F3 Job Setup.
  2. Press Enter or F4 Meas Plane Setup.
    The Measurement Plane Setup screen appears.
  3. Ensure the correct measurement plane displays at the top of the screen.
    Press Enter or F2 Select Meas. Plane to go to the next plane, if necessary.
  4. Use the up and down arrow keys to select a measurement point.
  5. Press F9 Edit MPT ID.
  6. Enter up to three characters to identify the measurement point.
  7. Press Enter.