Set up the measurement points in Balance


The Measurement Plane Setup screen displays all of the points for a selected plane. You can modify the point ID, the angle on the rotor, the channel, and the location.
Note: You cannot change the symbol for a measurement point.


  1. From the Measurement Plane Setup screen, use the arrows to select a measurement point.

    Measurement points

  2. Press F9 Edit MPT ID to change the point ID.
  3. Press F10 Enter MPT Angle to enter a new angle relative to the Top-Dead-Center (TDC).
    The symbol on the graph changes location.
  4. Press F11 Enter MPT Channel to change the channel.