Open the main menu options

Procedure

  1. Press ALT > MENU.
    SETUP and the menu option displays.
  2. Turn the tuning knob to cycle through the main menu selections.
    Option Description
    DECPT Set the number of decimal places to none, one, or two.
    BLITE Turn the backlight on or off. Backlight: Yes=On, No=Off
    INPUT Select positive (rising) or negative (falling) edge for the input signal.
    OUTPT Select positive (rising) or negative (falling) edge for the output signal.
    BLANK Turn input blanking on or off. Yes=On, No=Off
    ACCEL Set the accelerometer sensitivity to 10m V/g or 100m V/g.
    ANALZ Select Yes if an analyzer powers the accelerometer. Select No if the strobe powers the accelerometer.
  3. When the desired menu option displays, press MENU to select it. Press any button to cancel.
  4. Turn the tuning knob to edit the menu options.
  5. Press MENU to save your changes. Press any button to cancel.
  6. Press any button other than MENU to exit the main menu.
    DONE displays.