Edit the equipment ID and description for an Analyze job

Procedure

  1. From the Analyze main menu, press F9 Job Setup.
  2. To switch between internal memory or a memory card, press F1 Change Job > F3 Change Location.
  3. Select a job and press F4 Select Job.
  4. Press F3 Edit This Job.
  5. Set the following options, as necessary.
    Option Description
    F7 Edit Equip ID Enter up to 10 characters to identify the equipment.
    F8 Edit Equip Desc Enter up to 28 characters to describe the equipment.
  6. Press Enter.