Edit the measurement ID and description for an Analyze job

Procedure

  1. From the Analyze main menu, press F9 Job Setup.
  2. To switch between internal memory or a memory card, press F1 Change Job > F3 Change Location.
  3. Select a job and press F4 Select Job.
  4. Press F3 Edit This Job.
  5. Select a measurement in the job.
  6. Press F5 Edit Meas, and set the following options as necessary.
    Option Description
    F2 Edit ID Enter up to three characters to identify the measurement point for input 1.
    F3 Edit ID Enter up to three characters to identify the measurement point for input 2.
    F4 Edit ID Enter up to three characters to identify the measurement point for input 3.
    F5 Edit ID Enter up to three characters to identify the measurement point for input 4.
    F6 Edit Descript Enter up to 20 characters to describe the equipment.
  7. Press Enter.