Add a measurement point to a Balance job
Overview
You can add up to three measurement points for a measurement plane. The points are added at the end of the list.
Note:
This is available only in Advanced Balance mode.
Procedure
From the
Balance
main menu, press
F3 Job Setup
.
Press
Enter
or
F4 Meas. Plane Setup
.
The
Measurement Plane Setup
screen appears.
Ensure the correct measurement plane displays at the top of the screen.
Press
Enter
or
F2 Select Meas. Plane
to advance to the next measurement plane, if necessary.
Press
F7 Add MPT
.
The measurement point appears in the table with a default ID, angle, channel, and symbol.