Your analyzer may support up to four channels in each program to
simultaneously collect data. To use the multi-channel functionality, set the
number of inputs in the
Input Setup menu in each program, set up a sensor
for each input, and use a connection listed below. For routes, you need to set
up the inputs and sensors in AMS Machinery Manager.
Number of inputs
|
Connection options
|
1
|
Use a single cable.
|
2
|
- Use two single
cables on two separate inputs (acceleration only).
- Use a splitter
cable on one input.
- Use the CSI 2140
Four-Channel Input Adapter.
|
3
|
- Use a splitter and
one single cable on two separate inputs.
- Use the CSI 2140
Four-Channel Input Adapter.
- Use the triaxial
accelerometer with a single cable.
|
4
|
- Use two splitters
on two separate inputs.
- Use the CSI 2140
Four-Channel Input Adapter.
- Use the triaxial
accelerometer with a single cable on one accelerometer input and another cable
on the other accelerometer input.
|