Set the plot type for collected route data

 

Overview

The Select Data Display option applies only to collected data on the Route Data Collection screen and the data plot. It does not affect the plots displaying during data collection.

Procedure

  1. Activate a route.
  2. From the Route Data Collection screen, press ALT > F1 User Setup > F2 Select Data Display.
  3. Use the up and down arrows to select a plot type.
    Option Description
    None No plot is displayed on the Route Data Collection screen. This option has the fastest data acquisition. When you plot the data, a spectrum displays.
    Parameters Display the analysis parameters for the measurement point as text. When you plot the data, a spectrum displays.
    Bar Graph-labeled Display the analysis parameters as a bar graph with labels. When you plot the data, a spectrum displays.
    Bar Graph-no labels Display the data as a bar graph without labels. When you plot the data, a spectrum displays.
    Spectrum Display a spectrum for each point.
    Waveform Display a waveform for each point.
    Dual Display a waveform and spectra for each point.
  4. Press Enter.