View the sensor setup for a route measurement point

Overview

You can view the sensor parameters for the active route measurement point. If necessary, you can override this setup on the analyzer if the appropriate sensor is not available. See Override the sensor setup for a route. You cannot change the values from the Sensor Setup screen on the analyzer.

Procedure

  1. Activate a route.
  2. Ensure the desired measurement point is displayed.
  3. From the Route Data Collection screen, press ALT > F12 More Point Info > F8 Sensor Setup.
    The Sensor Setup screen displays the sensor type, sensitivity, power, signal coupling, and accelerometer configuration display.
  4. Press Enter.