Print a plot

 

Prerequisites

  • On the analyzer, press Home > ALT > F2 General Setup > F6 Set Print Mode and ensure the default print mode is set to Send to PC.
  • Ensure the same connection type is set on the analyzer and in Data Transfer. The Ethernet and Wireless options may require additional setup to connect to the desired computer. See the Ethernet and Wireless sections and your IT group for more information.

Procedure

  1. Use the appropriate cable to connect your analyzer to a computer where AMS Machinery Manager is installed, if you are using a wired connection.
  2. On the computer, open Data Transfer.
  3. On the analyzer, display the plot.
  4. Press F7 Print Plot.
    The analyzer connects to AMS Machinery Manager. The plot is displayed.
  5. Click the print icon in the AMS Machinery Manager toolbar to send the plot to the printer.