Prerequisites
Ensure the same connection type is set
on the analyzer and in
Data Transfer. The Ethernet and Wireless
options may require additional setup to connect to the desired computer. See
the Ethernet and Wireless sections and your IT group for more information.
Procedure
-
Use the appropriate cable to connect your analyzer to a computer
where AMS Machinery Manager is installed, if you are using a wired connection.
-
On the computer, open
Data Transfer.
-
On the analyzer, press
.
The analyzer connects to AMS Machinery Manager.
-
To load a job using AMS Machinery Manager:
-
Select the appropriate database in the
Navigation - Data Transfer pane.
-
Drag and drop or copy and paste the desired job to the
connected analyzer in the
Data Transfer tab.
The Data Transfer Notification pane displays the
progress of the transfer.
-
To load a job using the analyzer:
-
Press
F1 Set Storage Location to select internal
memory or a SD memory card.
-
Press
F7 Load Jobs.
-
Press
F8 or
F9 to select a database.
-
Press
F10 or
F11 to select an area within the database.
-
Press
F4 Select Area.
-
Press
F8 or
F9 to select a job and press
F1 Select.
-
Press
F7 Load Jobs.
-
After the transfer completes, press the Back key to return to the
Job Manager screen.