Dump a route or job from the analyzer to a folder on a computer

 

Prerequisites

Ensure the same connection type is set on the analyzer and in Data Transfer. The Ethernet and Wireless options may require additional setup to connect to the desired computer. See the Ethernet and Wireless sections and your IT group for more information.

Overview

Transfer a file to a folder on your computer using AMS Machinery Manager.

Procedure

  1. Use the appropriate cable to connect your analyzer to a computer where AMS Machinery Manager is installed, if you are using a wired connection.
  2. On the computer, open Data Transfer.
  3. In AMS Machinery Manager, click the File Transfer icon.
    The File Transfer pane appears at the bottom of the screen.
  4. Click the Analyzer Files tab.
  5. Click the Working Directory link, and select a folder on the computer to store the file.
  6. Click OK.
  7. On the analyzer, open a program and select Connect For Transfer using the path below. Select the program based on the type of route or job you want to transfer.
    Program Key sequence to Connect for Transfer option
    Analyze Home > F7 Analyze > ALT > F9 Connect For Transfer
    Balance Home > F9 Balance > F12 Job Manager > F7 Connect For Transfer
    ODS/Modal Home > F12 ODS/Modal > F8 Job Manager > F7 Connect For Transfer
    Route Home > F8 Route > ALT > F9 Route Mgnt > F7 Connect For Transfer
    Transient Home > F11 Adv. Transient > F8 Job Manager > F7 Connect For Transfer
    The analyzer connects to AMS Machinery Manager.
  8. On the computer, copy and paste or drag and drop one or more files from the top pane displaying the analyzer files to the File Transfer pane at the bottom of the screen.
    The file appears in the File Transfer pane and is saved to the folder.