Connect to the CSI vibration analyzer

 

Overview

For the CSI 2140, use the D25535 cable. For the CSI 2130, use the D25199.

Procedure

  1. Connect the appropriate connections on the strobe cable to the corresponding accelerometer and volts/tach (M12) connectors on the CSI vibration analyzers.
  2. Connect the labeled connections to the Input and Output connections on the CSI 555.
  3. For the CSI 2130, connect the accelerometer to the strobe cable. For the CSI 2140, you must provide the cable to connect the analyzer to the accelerometer.