Enter a network address for an AMS Trex unit

You can specify how an AMS Trex unit connects to your network. Enter DHCP to allow a network address to be assigned, or Static to specify an IP address and/or Subnet Mask.

Note:

Contact your network administrator before changing settings. Ensure the port you are sending to is configured to receive AMS Trex data.

  1. Tap Settings.
  2. Tap Wi-Fi, and turn on Wireless Networks.
  3. Tap IP Address, and tap the IP Address Assignment line to change from DHCP to Static.
  4. Enter an IP Address, and/or Subnet Mask.
  5. Tap OK.