Install firmware onto the Trex unit

  • Ensure you downloaded the updates for the Trex unit to Upgrade Studio. You can also import the updates into Upgrade Studio.
  • Ensure the AC adapter is attached and powering/charging the Trex unit before transferring or installing any updates.

You can transfer and install new or updated firmware onto the Trex unit.

  1. Connect the Trex unit to the PC where Upgrade Studio is installed.
  2. In Upgrade Studio, click Install Updates.
  3. Click the Trex unit that is displayed on the left side of the screen.
  4. Under Firmware, click Show Details.
  5. On the To Be Installed tab, select the firmware to be installed.
  6. Click Install.
    A message indicates the Trex unit will be restarted after the installation completes.
  7. Click OK.