Set the number of measurements to average

You can set the number of measurements to average for the DC voltage, noise, and signal level measurements. The option below applies to all three measurements; you cannot set a different number of averages for each measurement.

By default, the Fieldbus Diagnostics application averages the ten most recent measurements. The average value is displayed on the Details screen.

  1. On the Fieldbus Diagnostics Overview screen, tap Settings.
  2. Tap # of Measurements to Avg.
  3. Enter the number of measurements to average between 0 and 100.
    The default value is 10.
  4. Tap OK.