Synchronize AMS Trex data to AMS Device Manager using USB

CAUTION:
Remove the USB cable from the Trex unit before connecting to a device. Do not use USB communication in a hazardous area.

AMS Device Manager is licensed to communicate with AMS Trex.

AMS Device Manager is paired with the AMS Trex Device Communicator being synchronized.

  1. Connect the micro-USB end of the cable to the AMS Trex unit.
  2. Connect the USB to the AMS Device Manager station.
    AMS Trex begins downloading Audit Trail events to the AMS Device Manager Audit Trail.
    Note: If the AMS Trex unit Wireless is turned on and connected to a network containing the paired AMS Device Manager station, you do not need to sync using USB. Any data that is new since the last synchronization will automatically connect and download to the AMS Device Manager database.